| EV Charging Power and Time | | | | | |
| Charger | AC/DC | Rated Power | 30kWh Battery | 60kWh Battery | 90kWh Battery |
| Schuko 16A | AC | 3.6kW | 8hrs | 16hrs | 24hrs |
| Schuko 32A | AC | 7.2kWh | 4hrs | 8hrs | 12hrs |
| 1-phase 16A | AC | 3.6kW | 8hrs | 16hrs | 24hrs |
| 1-phase 32A | AC | 7.2kWh | 4hrs | 8hrs | 12hrs |
| 3-phase 16A | AC | 11kW | 3hrs | 6hrs | 9hrs |
| 3-phase 32A | AC | 22kW | 1.5hrs | 3hrs | 4.5hrs |
| DC Fast charge | DC | 50kWh | 40mins | 80mins | 120mins |
| Tesla Supercharger | DC | 120kW | 15mins | 30mins | 45mins |
Attention to know
EV chargers are splash, water and dust resistant and have been tested under strictly controlled laboratory
conditions to achieve an IP65 rating in accordance with IEC standard 62196. However, the resistance to splashes, water and dust is not permanent and may weaken over time under normal use. Damage caused by liquids is not covered by the warranty.
To prevent damage to your charger from liquids, please avoid the following situations :
1. Exposing the charger to pressurised water or high velocity water flow.
2. Intentionally submerging the charger in water.
3.Operating the charger beyond the recommended temperature range or in extremely humid environments
4. Dropping the charger or subjecting it to other shocks.
5. Disassemble the charger, including removing the screws.
If the charger comes into contact with liquid, turn off all power until it is completely dry.
Placing the unit in front of a fan so that cold air is blowing directly on the charging connector may help to speed up the drying process.
Do not use an external heat source to dry the charger, or insert foreign objects such as cotton swabs or paper towels into the charging port.
